Cars - Vortx Super - Starter Kit
Vortx Super Starter Kit
Starter Kit:- MNR car or bike engine powder coated round tubular chassis
- With all engine / gearbox mountings for your application
- Fully triangulated around footwell and bulkhead areas,
- Additional triangulation around front suspension area
- Triangulated and braced front and rear floor pans,
- Fitted and bonded front barley seed pattern floor pan and rear polished floor pans
- Standard rac approved integral rollcage made from T45 tube ( optional cobra hoops at no extra cost )
Starter Kit Upgrades:- Extra
- Black Inserts On Front And Rear Arches
£
- Carbon Inserts On Front And Rear Arches
£
- Coloured Insert On Transmission Tunnel Top
£
- Carbon Insert On Transmission Tunnel Top
£
- Coloured Insert On Dashboard Facsia
£
- Carbon Insert On Dashboard Facsia
£
- Side Bars Upgrade
£
- Full Race Cage Upgrade ( includes side bars )
£ MNR car or bike engine powder coated round tubular chassis
With all engine / gearbox mountings for your application
Fully triangulated around footwell and bulkhead areas,
Additional triangulation around front suspension area
Triangulated and braced front and rear floor pans,
Fitted and bonded front barley seed pattern floor pan and rear polished floor pans
Standard rac approved integral rollcage made from T45 tube ( optional cobra hoops at no extra cost )
Integral floor mounted bias pedal box
Integral 4 point seat belt fixings
MNR Powder Coated Fully Rose Jointed Suspension Set
FRONT TOP WISHBONE SET
2 X FRONT TOP WISHBONES STRAIGHT BOSS TAKES 1/2 UNF RODEND
4 X 7/16 UNF RODENDS
4 X 7/16 UNF RIGHT HAND LOCKNUTS
2 X 1/2 UNF RODENDS
2 X 1/2 UNF RIGHT HAND LOCKNUTS
2 X 1/2 UNF LARGE WASHERS
2 X THREADED CAMBER ADJUSTERS LONG 1/2 UNF THREAD
4 X 7/16 UNF X 3 INCH BOLTS
4 X 7/16 UNF NYLOCS
36 X 7/16 WASHERS
8 X 7/16 UNF SIDESPACERS
FRONT LOWER WISHBONE SET
2 X FRONT LOWER WISHBONES WELD IN UNIBALL TYPE
4 X 7/16 UNF RODENDS
4 X 7/16 UNF RIGHT HAND LOCKNUTS
2 X UNIBALLS FOR LOWER WISHBONE
2 X RETAINING CIRCLIPS FOR UNIBALL
2 X 1/2 UNF X 4 INCH BOLTS FOR BOTTOM PUSH ROD LOCATION
2 X 1/2 UNF NYLOCS FOR BOTTOM PUSH ROD LOCATION
4 X 1/2 UNF WASHERS FOR BOTTOM PUSH ROD LOCATION
4 X 7/16 UNF X 3 INCH BOLTS
4 X 7/16 UNF NYLOCS
36 X 7/16 WASHERS
8 X 7/16 UNF SIDESPACERS
REAR LOWER WISHBONES
2 X REAR LOWER WISHBONES
8 X 7/16 UNF R/H ROD ENDS
8 X 7/16 UNF LOCKNUTS
12 X 7/16 UNF SIDESPACERS
4 X 7/16 UNF X 3 INCH BOLTS
4 X 7/16 UNF NYLOCS
36 X 7/16 WASHERS
REAR TOP WISHBONES
2X REAR TOP WISHBONES
4 X 7/16 UNF RODENDS
4 X 7/16 UNF RIGHT HAND LOCKNUTS
2X THREADED CAMBER ADJUSTERS 1/2 UNF THREAD
2 X 1/2 UNF R/H ROD ENDS
2 X M12 LARGE WASHERS
2 X 1/2 UNF LOCK NUTS-RH
4 X 7/16 UNF X 3 INCH BOLTS
4 X 7/16 UNF NYLOCS
36 X 7/16 WASHERS
8 X 7/16 UNF SIDESPACERS
REAR UPRIGHT PARTS
2X REAR UPRIGHTS TAPPED-HANDED
2X 1/2 UNF X 4 INCH BOLTS
2X 1/2 UNF NYLOCKS
4 X 1/2 UNF SIDE SPACERS
20 X 1/2 UNF WASHERS
4 X 7/16 UNF X 1 1/2 INCH BOLTS
8 x m10 x 30 CAPHEAD BOLTS FOR BEARING TO REAR UPRIGHT FIXING
STEERING PARTS
2 X M12 NYLOCKS FOR RACK BODY FIXING
4X M12 WASHERS FOR RACK BODY FIXING
2 X M12 X 70MM HEX BOLTS FOR RACK BODY FIXING
2 X M8 X 40 BOLTS FOR STEERING LINK FIXING
2 X M8 NYLOCS FOR STEERING LINK FIXING
4 X M8 WASHERS FOR STEERING LINK FIXING
1X STEERING COLUMN TO RACK LINK
1X STEERING COLUMN BUSH SET
2 X M10 X 50 BOLTS
4 X M10 LARGE WASHERS
2 X M10 NYLOCS
1X MODIFIED RACK BODY
1X RACK PINION
1X RACK PINION CONTAINER
1 X SHORTENED QUICKRACK SHAFT
2X STEERING RACK EXTENSIONS
2X STEERING ARMS FROM DONOR RACK
2X SIERRA TRACK ROD ENDS1XLH 1XRH-3368/9
2X M10 X1 NYLOCKS FOR TRACKROD ENDS
2 X STEERING RACK BOOTS
2 X M12 X 60 SET SCREWS TO MOUNT COLUMN TO CHASSIS
2 X M12 NYLOCS TO MOUNT COLUMN TO CHASSIS
4 X M12 WASHERS TO MOUNT STEERING COLUMN TO CHASSIS
SHOCKER PARTS
2 X PROTECH SHOCKERS ON BEARINGS 12 INCHES LONG
2 X PROTECH SHOCKERS ON BEARINGS 14 INCHES LONG
4 X SPRINGS-SEE CHART
6 X 1/2 UNF X 3 INCH BOLTS
6 X 1/2 UNF NYLOCS
48 X 1/2 UNF WASHERS
12 X 1/2 UNF SIDESPACERS
2 X ALLOY BILLET ROCKERS
4 X CUP BEARINGS FOR ROCKERS
4 X THRUST BEARINGS FOR ROCKERS
8 X THRUST BEARING WASHERS FOR ROCKERS
2 X M12 X 75 BOLTS FOR ROCKER MOUNTING
2 X M12 NYLOCS FOR ROCKER MOUNTING
4 X M12 WASHERS FOR ROCKER MOUNTING
2 X PUSHRODS
2 X 1/2 UNF RIGHT HAND ROSEJOINTS
2 X 1/2 UNF RIGHT HAND ROSEJOINT LOCKNUTS
2 X 1/2 UNF LEFT HAND ROSEJOINTS
2 X 1/2 UNF LEFT HAND ROSEJOINT LOCKNUTS
FUEL PARTS
30 X 5 MIL SHORT RIVETS FOR FUEL LINE X 40 IF FUEL INJECTED
1 X COPPER FUEL LINE OR X2 IF FUEL INJECTED
2 X 18 INCH RUBBER FUEL HOSE X 4 IF FUEL INJECTED
4 X JUBILEE CLIPS-FOR FUEL LINE 11-16 X 8 IF FUEL INJECTED
25 X 3/8 INCH P CLIPS
1 X FUEL TANK
2 X FUEL TANK STRAPS
ENGINE MOUNTINGS
1 X ENGINE CRADLE &CORNER BOLTS IF BIKE ENGINE
1 X ENGINE BOLTS KIT
1 X ENGINE MOUNTS KIT IF CAR ENGINE
BODY FITTINGS
1 X C/F BOOT COVER
2 X INNER C/F SIDE PANELS
1 X INNER C/F BACK PANEL
20 X BLACK NO. PLATE SCREWS FOR BOOT COVER
2 X ALLOY FOOTWELL PANELS
30 X 3.2MM RIVETS FOR FOOTWELL PANELS
1 X ALLOY SCUTTLE PANEL COVER
1 X ALLOY SCUTTLE PANEL PEDAL COVER
50 X 3.2MM RIVETTS FOR SCUTTLE PANEL COVER
2 X NUMERPLATE SCREWS BLACK FOR PEDAL COVER
1 X TUBE OF BONDING AGENT FOR INTERIOR PANELS
1X HEADLAMP BAR
2 X M8 X40 BOLTS FOR HEADLAMP BAR
2 X M8 NYLOCS FOR HEADLAMP BAR
4 X M8 WASHERS FOR HEADLAMP BAR
1 X PAIR CYCLE WING BRACKETS
4 X 90 DEGREE CYCLE WING BRACKET ARMS
4 X CYCLE WING BRACKET SLEEVES
8 X M5 X 40 BOLTS
16 X M5 WASHERS
8 X M5 NYLOCS
MNR Full Ten Piece Bodywork Set Available In 70 colours ( Optional Windscreen )
BODYWORK
SIDE/REAR PANEL
2X REAR ARCHES
2 X 1.5 METRE STRIPS OF REAR WING PIPING
14 X M5 X 20 BOLTS FOR REAR ARCHES
14 X M5 NYLOCS FOR REAR ARCHES
28 X M5 WASHERS FOR REAR ARCHES
SCUTTLE PANEL
4 X M8 X 20 BOLTS FOR SCUTTLE FIXING
4 X M8 LARGE WASHERS FOR SCUTTLE FIXING
BONNET
NOSE CONE
4 X M8 X 20 BOLTS FOR NOSECONE FIXING
4 X M8 LARGE WASHERS FOR NOSECONE FIXING
4 X M8 NYLOCSW FOR NOSECONE FIXING
2 X FRONT ARCHES
4 X NUMBER PLATE SCREWS FOR FRONT ARCHES
1 X GRP ONE PIECE TUNNEL COVER
4 X NUMBER PLATE SCREWS FOR TUNNEL FIXING
BRAKE PARTS
BRAIDED HOSE SET-02 STANDARD
MASTER CYLINDER TO FRONT T PIECE PIPE
MASTER CYLINDER TO REAR T PIECE PIPE
2X FRONT T PIECE TO FLEXI PIPE
2X REAR T PIECE TO FLEXI PIPE
3 WAY T PIECE
4 WAY T PIECE
2 X M5 X 40 BOLTS FOR T -PIECE FIXING
2 X M5 NYLOCS FOR T-PIECE FIXING
4 X M5 WASHERS FOR T-PIECE FIXING
BRAKE PRESSURE SWITCH
50 X 3/16 P CLIPS FOR BRAKELINE FIXING
50 X SMALL RIVETS-3.2 FOR BRAKELINE FIXING
